- Sizes: 9mm, 11mm, 12.5mm.
- Cross Block Length: 5.1/2" (140mm).
- Main Pulling Rods: 8" (200mm).
- Forcing Screw: 5/8" UNF x 18tpi x 8.1/2" (215mm) Long.
- Spread: 1.9/16" to 4.11/32" (40 to 110mm).
- Reach: 16.3/8" (415mm).
40 To 110mm Capacity
This bearing extractor kit can remove bearings without the need to dismantle machinery or remove the running shaft. Positive seating allows an even tension on the inner and outer bearing rings, reducing friction and resistance. Three pairs of ball type extractor heads are supplied.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.