1/4" Hex drive hollow nut drivers for use with item CR015 Screwdriver, CR016 T-Handle, CR019 Bit Holder or any other 1/4" Hex drive.
Motorcycle Repair Tool Kit (Items Available Separately):
| Item No. | Description |
|---|---|
| CR001 | Crank Case Installer (10x1.25, 12x1.25mm Nuts) |
| CR002 | Drive Chain Breaker (3-22mm) Pin Dia. 3.5-6mm |
| CR003 | Universal Flywheel / Clutch Holding Tool |
| CR004 | Magneto Flywheel Puller 28 x 1.0mm (R-Hand) |
| CR005 | Magneto Flywheel Puller 27 x 1.0mm (L-Hand) |
| CR006 | Magneto Flywheel Puller 24 x 1.0mm (R-Hand) |
| CR007 | Magneto Flywheel Puller 16 x 1.5mm (R-Hand) |
| CR008 | Magneto Flywheel Puller 14 x 1.5mm (R-Hand) |
| CR009 | Speedometer Front Wheel Gear Nut Socket |
| CR010 | 3Pc. Tappet Adjusting Tool (8 & 9mm) |
| CR011 | Clutch Nut Socket (22mm dia. 4 Pins) |
| CR012 | Clutch Nut Socket (23mm dia. 4 Pins) |
| CR013 | Valve Spring Collet Remover/Replacer |
| Item No. | Description |
|---|---|
| CR014 | D/Ended Steering Lug Nut Hook Wrench |
| CR015 | Screwdriver with 1/4"Hex Bit Holder |
| CR016 | "T"-Handle with 1/4"Hex Bit Holder |
| CR017 | 10mm x 1/4"Hex x 100mm Deep Socket |
| CR018 | 8mm x 1/4"Hex x 100mm Deep Socket |
| CR019 | 1/2"Sq. Drive x 1/4"Hex Bit Holder |
| CR020 | #2Phillips x 6mm Slotted x100mm 1/4"Hex Bit |
| CR021 | #3Phillips D/End x 100mm 1/4"Hex Bit |
| CR022 | 5mm, 6mm Hex D/End x 100mm 1/4"Hex Bit |
| CR023 | 4mm, 5mm Hex D/End x 200mm 1/4"Hex Bit |
| CR024 | #2Phillips D/End x 200mm 1/4"Hex Bit |
| CR025 | #3Phillips D/End x 300mm 1/4"Hex Bit |
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.