Use code SOS10 for 10% discount at checkout!
- 304 Stainless Steel water connection
- Corrosion resistant for long life
- UV resistant epoxy coating with a minimum thickness of 30 micron in Almond
- Air valve with sealing cap eliminates leaks
- Food grade approved high-grade diaphragm ACS, AS/NZS4020
- 5 Year Tank Replacement Guarantee
- Booster Systems
- Borehole Systems
- Sprinklers
- Irrigation Systems
- HVAC
- Thermal Expansion
- Water hammer arresting
- An energy saving device such as a Bianco Pressure Tank stores energy in the form of pressurized water.
- The energy is transformed by the pump from electricity to water pressure. With a Bianco tank there is no loss of energy once it has been stored in the device.
- By installing a Bianco Tank, the pump start events can be cut by 40 – 80%
- Saving Power
- Extending Pump Life
- Reducing Noise
- Low Initial Cost - The Bianco Tank is easy to fit to pumps and can even be wall mounted, the tank can be installed within minutes and can be fitted to any brand of pump.
- Pressure switch controlled pumps with differential pressure set at 140 kPa (20 psi), pre-charge the tank to 20 kPa (3 psi) below the cut in pressure.
- For pumps controlled by pressure switches with higher differential pressures, electronic controls or variable speed controls, pre-charge the tank to 65% of the maximum system pressure.
- Pressure tanks installed on mains pressure, pre-charge should be set at the mains pressure.
- For hot water expansion, pre-charge should be set at the mains pressure.
Technical Specifications
| Brand | Bianco Pumpz |
| Product Type | Accessory |
| Suitable For | BPT-18 |
| Suitable For | BPT-18-25BAR |
| Suitable For | BPT-24 |
| Suitable For | BPT-8 |
Description
BPT WALL BRACKET
Keeps the pressure tank secured to the wall.
Compatible with:
Bianco Pressure Tanks
Fitting a suitably sized pressure tank to a system will reduce the number of times the pump starts, saving energy (and money) and extending the life expectancy of the pump.
Essential to manage pump cycling on systems controlled by a pressure switch, fitting a tank to a pump with an automatic pump controller will save energy. Firstly the tank will pay for itself and then it leaves money in the bill payer’s wallet.
Pressure tanks also isolate against the effects of water hammer and can be used in expansion management.
View Full Range
Features & Benefits
Applications
| Materials of Construction | |
|---|---|
| Pressure Tank | Steel |
| Internal Coating | Food Grade Approved Liner |
| Water Connection | Stainless Steel |
| Air Valve Stem | Brass |
| Diaphragm | Food Grade Approved |
Energy Saving Device
Setup & Installation
Shipping Requirements
CAUTION!THE PRESSURE TANKS ARE PREFILLED WITH NITROGEN SO PLEASE ENSURE THAT YOU REMOVE GAS PRESSURE VALVE STEM BEFORE SHIPPING VIA AIRFREIGHT.